Mineral Springs Pool Care Program
You’ll love everything about the Mineral Springs system. For starters, it’s almost “hands-off,” and takes only a few minutes a week to maintain. In fact, once you’ve begun the system, you only have to add the Renewal® product once a week. That’s it!
The Mineral Springs system is perfect for frequent travelers or vacation-takers. Through proper use of the system, you can leave home and forget your pool while you enjoy your trip. Even better, with Renewal you can add advanced applications for weeks ahead. This system works for you!
The Mineral Springs
system utilizes easy-to-apply minerals and an automatic device to produce a chlorine sanitizer:
A proprietary blend of minerals added to pool water at start-up
Helps to replenish mineral levels, keeping water soft and clear
The Mineral Springs Unit [Controller and Cell]
Utilizes Beginnings and Renewal products to produce a chlorine sanitizer.
Essential elements pass through the Mineral Springs cell to produce sanitizer. The minerals are converted into free chlorine that kills bacteria and algae in the pool. The cell, along with the flow detector, are plumbed into the pool return line piping. The flow switch/detector informs the controller that water is flowing and that the generation process can start. The temperature and mineral level sensors keep the Mineral Springs controller calibrated regardless of pool temperature.
Adds BioGuard’s proprietary blend of elements and stable minerals to water, creating a total mineral bathing environment. You’ll notice the difference immediately.
Usage requires minerals to be present in pool water. Apply one bag per 1,000 gallons of pool water at start-up or as needed to obtain proper mineral levels.
Replenishes lost mineral levels and rejuvenates the Mineral Springs® system. Renewal® contains pH balancers and adjusters to offset pH drift including chelants and scale inhibitors. This helps prolong the life span of the Mineral Springs electrolytic cell. Renewal also contains a filter aid and helps in maintaining crystal clear
Apply one bag per 20,000 gallons weekly to replenish mineral levels.
Mineral Springs Units
BioGuard® currently offers 5 Mineral Springs® units to meet the needs of all pool types–in-ground, above-ground; large or small.
MS-10 and MS-11
Treat in-ground residential pools up to 40,000 gallons or commercial pools up to
25,000 gallons. The MS-10 model can be hardwired either 120 VAC or 240 VAC. The MS-11 model is a 120 VAC with a line cord for a GFI outlet.
MS-20, MS-22 and MS-23
Treat above-ground pools up to 18,000 gallons. The MS-20 and MS-22 models are 120 VAC with a line cord for a GFI outlet. The MS-23 model is a 120 VAC with a line cord, but contains a twist lock plug. [The electrical code in some areas of the US requires this type of plug.] The MS-22 and MS-23 are installed directly to the return jet.
NOTE: While any
of these models may be installed on above-ground pools, final selection is based upon plumbing set-up.
- Adjustable dial to regulate electrolytic generation of sanitizer
- Sanitizer boost button ensuring production of sanitizer for 24 hours while pump is operating or until power is turned off
- Self-cleaning mechanism to avoid scale build-up
- Low mineral shut-off to protect cell if mineral residual drops below recommended level
- UL approved
- In-ground models interface with Jandy Aqua Link System and are NSF-listed
- Aboveground/small pool models contain a 24-hour time clock to control filter pump